5BY-5B seed coating machine seed treater seed processing machine

Features

The 5BY-5B seed treater is controlled by the dosing pump, it can adjust the quantity and the percentage of medicine : seed, so it is easy operate, and it can clean itself automatically.

Application

The 5BY-5B series seed treater is a good choice for coating seed. It applies for various crops, such as seed of wheat, barley, maize, sorghum, soybeans, cotton, vegetables, fruits etc.

Introduction

The 5BY series seed coating machine is the main machine for seed processing, the machine for coating seed of various crops, such as seed of wheat, barley, maize, sorghum, soybeans, cotton, vegetables, fruits and so on.

It has the optimal design, and is very famous in Chinese market. It has many advanced designs such as use the high-speed centrifugal rotational disk for atomization of seed coating medicine, and use the soft auger for mixing. It has many advantages such as compact size, easy for operation, low failure, reliable, easy to clean-up, no gas release and accurate coating medicine injection, make uniform film of coating medicine and using widely.

Technical specifications

1. Capacity:5000 kg/h

2. Seed damage rate: ≤0.5%

3. Qualified coating seed: ≥93%(for seed of maize and wheat)

4. The adjusting range of ratio of medicine and seed: 1:25 1:120

5. Power: 2.3 KW

6. Noise: ≤85 dB (A)

7. Volume of coating medicine tank: 105 L

8. Amount of Furadan (cavbofuran) dissipation: ≤0.1mg/m³

9. Dimensions: 5BY-5B L*W*H (mm) =2100*800*2400

Working principle

The seeds go into the mixed box through the elevator, the seeds will evenly spread around by the cone-shaped grain scattering gear, in the scattering process, the medicament will deliver to the centrifugal rotational disk (which in the mixed box) by the measuring pump, under the high-speed centrifugal force, medicament will be atomized uniformly and effectively attached to the seed surface, forming an primary coated body, and then the primary coated body go into the blender, that will be mixed round and coated by soft auger, finally exit from the outlet.

Working process

Seed can be continuous fed into mixing cylinder through feeding bucket elevator, at the same time quantitative medicine liquid will be supplied by dosing pump, and then atomized by the high speed centrifugal rotary disk, following adhere to the surface of seeds, at the end completely mixed by the auger in the cylinder. High speed centrifugal rotary disk (for atomizing the liquid medicine) and large stainless steel cylinder (for mixing by auger rolling) can provide a good coating effect.