PES pleated filter element for beverage offered by china manufacturer

Specifications 1.PES pleat filter element

2.FDA listed materials

3.Manufacturer at factory price

4.In beverage industry

Manfre Supply PES Pleat Filter Element   ---Professional Manufacturer   The polyethersulfone membrane provides high contaminant capacity,
superior flow rates and consistent removal of particles and microorganisms. The cartridges are highly compatible with the most rigorous sanitizing methods
in the beverage industry. Reliability is further assured with the Manfre integrity
testable design.  

Filter Specifications	Dimensions / Parameters
Media Asymmetric polyethersulfone membrane Inner core, end caps, cage Polypropylene Support layers Spunbond Polypropylene Gaskets/O-Rings Buna-N, EPDM, Silicone, Viton, Teflon encapsulated Viton O-Rings Micron ratings 0.2 µm, 0.45 µm, 0.65 µm	Nominal lengths 9.75",  10",  20",  30",  40"     Outside diameter 2.7" (6.9 cm) Inside diameter  1.0" (2.54 cm) Surface area 7.6 ft2. (0.7m2) per 10 inch element	Max. sustained operating temperature 180F (82C) at 20 psid (1.38 bar) Max. differential pressure 60 psid @ 80F (4.14bar @ 27C) 30 psid @ 160F (2.07 bar @ 71C) 15 psid @ 200F (1.03 bar @  93C) Max. reverse differential pressure 40 psid @ 70F (2.76 bar @ 21C) Recommended  change-out pressure 35 psid (2.4 bar)

  Performance Specifications

Hot DI Water	Filter cartridge will withstand temperatures  of 185F (85C) for up to 30 consecutive minutes.
Cleaning/Sanitization	Compatible with most common chemical cleaning, sanitizing and sterilizing agents and with pH range from 1–14. Consult factory for specific compatibility information.
Steam/Autoclave	Cartridges may be steamed or autoclaved for at least 50 half-hour cycles @ 275F (135C).
Typical Bacterial Retention Performance	Pore Size	Retention
	0.2 µm:	LRV for B. diminuta ≥ 7.8
	0.45 µm:	LRV for S. marcescens ≥ 8.5
	0.65 µm:	LRV for S. cerevisiae ≥ 11   LRV for L. brevis ≥ 7.6
Integrity Test Specifications Minimum Bubble Point values and maximum Diffusive Air Flow (per 10-inch cartridge) values for Manfre filters wet with water:	Pore Size	Bubble Point	Diffusive Air Flow
	0.2 µm:	≥  38psig (2.6 bar)	≤  35cc/min @ 30psig (2.1 bar)
	0.45 µm:	≥  25psig (1.7 bar)	≤  35cc/min @ 20psig (1.4 bar)
	0.65 µm:	≥  18psig (1.2 bar)	≤  35cc/min @ 15psig (1.0 bar)

  Quality Assurance Manufactured in an ISO Class 7 cleanroom environment 
  100% flushed with 18 MΩ-cm DI water and integrity tested Meets USP Class VI Biological Test for Plastics
 
All materials are FDA listed for food and beverage contact   Repeatably steamable and sanitizable
 
High retention (LVR>7) of yeast and other spoilage organisms
 
Pore size, lot and serial number are stamped on each filter
element for identification and traceability     We have our own factory, Professional producing team. Korea technology is adopted,Have rich export experience. Special specifications can be produced by the customer's  requirements. Welcome custom!!!