Absolute Rated PTFE Membrane Filter Cartridges by Manfre

Specifications 1.PTFE pleat filter element

2.FDA listed materials

3.Manufacturer at factory price

4.In beverage industry

Manfre Supply PTFE Pleat Filter Element    The PTFE filter offers precision filtration–even under harsh, corrosive environments.
They are made with a polytetrafluoroethylene (PTFE) membrane with additional
polypropylene support layers and components. The HIMA retentive PTFE membrane offers superior hydrophobicity and water intrusion resistance compared to PVDF based media, and are more economical than all fluorocarbon filters.  

Filter Specifications	Dimensions / Parameters
Media  Gore-Tex® expanded PTFE membrane     Inner core, end caps, cage Polypropylene   Support layers  Polypropylene   Gaskets/O-Rings Buna-N, EPDM, Silicone, Viton, FEP/Viton   Micron ratings  0.05, 0.1, 0.2, 0.45, 1.0 µm	Nominal lengths 9.75",  10",  20",  30",  40"     Outside diameter 2.7" (6.9 cm)   Inside diameter  1.0" (2.54 cm)   Surface area  8.5 ft2. (0.79m2) – 10 inch element   End Configuration DOE Double Open End 226/Flat Single Open End  222/Fin Single Open End 226/Fin Single Open End  222/Flat Single Open End Double Open End, Internal O-Ring Single Open End, Internal O-Ring	Max. operating temperature  203°F (95°C)   Max. differential pressure  75 psid @ 70°F (5.2 bar @ 21°C) 40 psid @ 176°F (2.8 bar @ 80°C) 15 psid @ 203°F (1.03 bar @ 95°C)   Max. reverse differential pressure  40 psid @ 70°F (2.8 bar @ 21°C)

  Performance Specifications

Steam/Autoclave	Cartridges will withstand at least 50 steam/autoclave  1 hour cycles @ 275°F (135°C)
Integrity Test Specifications  Air Diffusion per 10 inch cartridge wet with 60/40 IPA/water. Contact Eaton for specific method.	Pore Size	specification
	0.05 µm:	≤  50 cc/min @ 22 psig (1.5 bar)
	0.1 µm:	≤  50 cc/min @ 18 psig (1.2 bar)
	0.2 µm:	≤  20 cc/min @ 12 psig (0.8 bar)
	0.45 µm:	≤  15 cc/min @ 5 psig (0.34 bar)
	1.0 µm:	≤  15 cc/min @ 3 psig (0.2 bar)

  Quality Assurance Manufactured in an ISO Class 7 cleanroom environment 
  100% flushed with 18 M-cm DI water and integrity tested Meets USP Class VI Biological Test for Plastics
 
All materials are FDA listed for food and beverage contact   Repeatably steamable and sanitizable
 
High retention (LVR>7) of yeast and other spoilage organisms
 
Pore size, lot and serial number are stamped on each filter
element for identification and traceability       We have our own factory, Professional producing team. Korea technology is adopted, rich export experience. Special specifications can be produced by the customer's  requirements. Welcome custom!!!