GKPC-62 : Anti Perching Spikes

Anti Perching Spikes     Product Description Bird spikes are a device consisting of long, needle-like rods used for bird control. They can be attached to building ledges, signs, windowsills, roof perimeters, air conditioners, support structure, awnings, poles, lights, statues, beams, trusses and building projections. The bird control spikes are used to deter birds without causing them harm or killing them. We manufacture tough UV stabilized poly carbonate anti bird spikes. The spikes are designed to protect very narrow ledges or to be used to protect the leading edge of a much wider surface.        ♦ Lowest cost bird spike!
♦ Humane, will not harm birds!
♦ Virtually Invisible!
♦ Glue Trough on base of spike allows for fast and easy application
♦ Will not cut or injure installer!
♦ Non-Conductive! Will Not Interfere with Electrical or Communication & Transmissions!    

Item number					GKPC-62
Number of spikes					28spikes
Material spikes					polycarbonate
Base length					28cm
Base width					2cm
Material base					polycarbonate

 
     
What Do The Bird Spikes Do?
The spikes keep pests from landing and sitting. All you do is glue them to where you want to keep pests away from and attach the spikes there. They will keep away pesky birds hanging out on the ledge above doors, on balconies, rafters, tree branches, and anywhere that birds generally sit. They will also keep other animals away from the area keeping it clean and free from noise and mess, which is not a good look.   How To Use The Bird Spikes?
To set up the spikes, you need to Find where the birds and pests are lingering
Clean the area
Trim the plastic spikes to fit the area
Use the glue which comes with the spikes on the area you wan to keep the birds away
Stick the bird spikes onto the glue.
Poof…no more birds!
The glue dries clear like silicone in about 5-10 minutes It is also easily removable with a putty-knife or scraper if you need to remove it..   You don’t want to leave any spaces in between the spike strips because birds will still be able to perch there. The maximum gap you can leave is 2-3 inches if you are trying to stretch the product. If you have a decent area you may want to but more than one pack or buy the larger pack.   A good tip if you are going to apply the bird spikes on a balcony or ledge is to use a line of fishing reel. Tie the fishing line so it acts like a fence and your bird spikes don’t fall off the edge while you are setting them up. You will have to cover the entire rail if you wish to keep the birds away.     Glue Groove
Quick and Easy Glue Application On the underside of the base is a unique"glue groove" which allows the installer to quickly and easily apply adhesive to the base from a caulking gun. Holes in the groove are designed to allow 'rivets' of glue to form, when the strip is pressed onto the surface, to ensure the strip will be securely anchored.
Alternatively, screw or rivet the bird spike base but thoroughly seal the penetration.
Recommended adhesive: a ‘neutral cure’ RTV product suited to the surface being fixed to.      Packaging & Shipping         Company Information         Our Services We are always in a position to quote you the most advantageous price for higher quality merchandise!