KWP125-315 Horizontal Centrifugal Pump

Products Introduction flow:6~3000m3/h head:3~80m diameter :40~500mm Impeller: 1. The series KWP pump is supplied with 4 kinds of impeller for selection. “K” impeller-Closed non-clogging impeller 2. For clear water , the sewage and fluids containing solids and sludge which do not liberate gas. “N” impeller-Closed multi-vane impeller 3. For clear water, the fluid containing slight suspension such as treated sewage, screen water, pulp water ,sugar juices ,and so on. “O” impeller-Open impeller 4. Same applications as “N” impeller but also including fluids containing air. “F” impeller-Free-flow impeller For fluids containing coarse solids liable to bunch or plait (such as long fibue admixtures , sticky particles and so on)and fluids containing air. Shaft seal: 1. Gland seal:There are two kinds of design :standard’s and high-temperature’s. The high temperature type should be used when the temperature is higher than 90℃. The stuffing box of this type can be cooled in order to be suitable for the transporting duty in high temperature. 2. Mechanical seal:It also be used for the application where leakage is not allowed. Rotating direction: The rotaing direction of the pump is clockwise as viewed from the end of drive. Drive: In general, they are directly coupled. They are also indirectly coupled with belt, the range of drive ration is from 1:1to1:2. Description The type of KWP pump is of single-stage ,centrifugal pump. It features high efficiency, non-clogging and back pull-out design which can allow the rotor to be removed from the pump casing without disturbing the piping or dismantling the casing. This not only simplifies maintenance but also allows fast inter change of the impellers and wear plate of suction side, thereby permiting the pump to be rapidly modified to suit different operating conditions. The KWP is from 40mm to 500mm allording to outlet diameter. Type KWP pump normally is suitable for delivering the neutral media (PH value is 6-8 about).For the application of corrosive fluid and other special requirements ,please quote this information when making order. Application The type of KWP pump can deliver all kinds of sewage, clear water, seawater, bittern water, waste water and sludge so that it can be used in water supply plant ,sewage treatment works, breweries, mines as well as the chemicals and construction industries.   Solution It has been applied by Shanghai Gaoqiao Petrochemical Corporation Lanzhou Petrochemical Corporation Guizhou Aluminum Plant ,Taiyan Sewage Treatment Plant, Shougang Group   Company Information Shijiazhuang Kingda Pump Industry Group Co., Ltd is the largest manufacturer of slurry pump, sewage pump, clear water pump and petrochemical pump in China, which includes scientific reasearch, design and manufacture. At present, Kingda Pump Group owns 12 subsidiaries, our anual production capacity is 13000 tons. We can supply all kinds of pumps and systems, and other products such as valve, cyslone, control starter to enterprises and fields whcih include environmental protection, wastewater treatment, supply and drainage for city plants, different kiinds of water conservancy projects, farm irrigation, metallurgical, mining, thermal power plant, coal, petrochemiccal, construction, FGD, etc. The products as natioonal fine quality products are sold well to the whole Chinese market with top market occupy rate. International market is beiing enlarged and products had been exported to more than 50 countries and districts such as North America, South America, Europe, Africa, South East Asia and Middle East.