Our company design the elevating the electromagnetic stirrer

   
             Electromagnetic Stirrer is composed of AC-DC-AC inverters, inductors, pure water-cooled devices (water-wind type), functional trolley and appurtenances. The function of AC-DC-AC inverters is to convert 50/60Hz industry frequency alternate current (AC) into a 0.5 ~ 5.0Hz, 3-phase low-frequency power. The power through sensor coil, will produce a traveling magnetic field, which penetrating stainless steel plate of the bottom of furnace and lining effect on molten aluminum, make molten aluminum regular movement, finally achieved the purpose of even stirring. By changing the voltage, frequency and phase of the variable frequency power supply, you can change the magnitude and direction of the stirring force.                "Stirring" aluminum smelting process is an important process measures. Mixing full or not directly determine the aluminum products’ quality. Mixing way has artificial stirring, gas stirring, mechanical agitation, electromagnetic stirring etc. with electromagnetic stirring because of its fully mixing, simple operation and grew in popularity.                            We sincerely welcome friends to visit and negotiate business!               Our company is professional producing the 2-150 tons of various kinds of specifications with aluminum melting pot electromagnetic stirring device, is the non-ferrous metal industry electromagnetic products professional manufacturers and suppliers, the product series: furnace bottom inductive electromagnetic stirring device, lateral inductive electromagnetic stirring device, renewable aluminum industry with double room furnace electromagnetic blender, etc. Electromagnetic stirring technology application can be obtained as follows effect:             1. Can make the melt alloy components uniform. General electromagnetic stirring device (no more than 20 minutes), can the whole furnace of various elements of the aluminium chemical composition of the relative deviation is less than 5%, can satisfy the almost all alloy to composition uniformity of the requirements.             2. The mixing process not destroy the oxidation layer, can reduce the melt hydrogen absorbing and oxygen, ensure the quality of the melt, and reduce the loss (relative value) 20 to 25%.             3. Can make the top and bottom of the melt temperature uniformity. General mixing ten minutes to the limit of the melt temperature can drop to less than 5 °C. So can reduce melting temperature, can improve the melt bottom alloying melting degree, in lower melting again at the same time can reduce the degree of damage.             4. In the process of aluminum ingots re-melting using electromagnetic stirring technology can shorten the time of smelting, improve work efficiency, reduce energy consumption, according to data provided by the already, can reduce energy consumption (improve efficiency) 20 to 30%.             5. No pollution aluminum melting liquid. This has the important meaning for high purity aluminium and the iron control strict alloy.6. Can reduce the labor intensity, and improve working con.