PVC-auxiliary agent DOTP oil

Epoxy Fatty Acid Methyl Ester (EFAME) PVC-auxiliary agent EFAME DOTP oil 

 I was my thought!I did not sleep a single moment that night.I always thought how to used Epoxy Fatty Acid Methyl Ester(EFAME) replace the DOP.But after all,i could Not recede.I was Fully committed and must go on with the fight.

Application 

Epoxy Fatty Acid Methyl Ester has higher flash

point and high epoxy value, mainly use for high-end PVC soft products, such as foaming PVC leather,

garment leather electric ,wire,cable, etc. 

Product Features

1.High flash point.The flash point of Epoxy Fatty Acid Methyl Ester HM-02 has reached 190 to 195 degrees,The higher flash point, the less to evaporate, which can avoid the explosion and combustion 

in the foaming tank during the PVC production process. 

2.High epoxy value .The higher the epoxy value ,the less the epoxy value will be reduced when meets 

high temperature .the effect of plasticizer will not be reduce , and can reduce the cost of PVC products 

with more substitution .

3. No odor. It has no odor, which guarantees that the finished products have no odor and there is

 not inoffensive odor in the workshop during rolling film and foaming production.

4. Environmental-protection: It is made of natural plant oil, which has the good environmental-protection

and also meet the EU environmental standards.

5. With good compatibility, low vaporization and good stability to the light and heat, Epoxy Fatty

 Acid Methyl Ester could reduce the use quantity of stabilizer.

Package

200kg/drum,1TM drum or flexible freight bag