Parallel Thread Rebar Splice with Upset End,rebar mechanical splice,Rebar Rolled Thread Splicing Coupler(D12-50mm)
Your message must be between 20 to 2000 characters
Contact Now| Place of Origin: | Hebei, China (Mainland) |
|---|
Specification:
1. Size: 14mm-40mm.
2. Raw Material:45# high-quality carbon structural steel.
3. Type: Standard Type, Left-Handed &Right-Handed Type, Reducing Type.
4. Tensile strength could reach 110% of mother material.
5. Suitable Rebar: HRB335,HRB400,HRB500 and Equivalent Rebars.
Technical Parameters:
Size |
D16 |
D18 |
D20 |
D22 |
D25 |
D28 |
D32 |
D36 |
D40 |
OD(±0.5mm) |
23.5 |
26.5 |
29.5 |
32.5 |
37 |
41.5 |
47.5 |
53.5 |
58.5 |
Length(±1mm) |
40 |
45 |
50 |
54 |
60 |
67 |
76 |
84 |
92 |
Thread Pitch |
2.5 |
2.5 |
2.5 |
2.5 |
3.0 |
3.0 |
3.0 |
3.0 |
3.0 |
Thread Angle |
60° |
60° |
75° |
75° |
75° |
75° |
75° |
75° |
75° |
Product Advantage
1. High tensile strength, suitable for various kinds of frame structure engineering.
2. Reach GB1499.2 and JGJ 107-2010 standard for the Grade I splicing rebar head.
3. Connection meet the following several parts of the properties:
1) The uniaxial tensile properties.
2) The high stress repeated tension and compression properties.
3) Large deformation repeated tension and compression properties.
4. Manufactured under strict quality control and reach ISO9001.
5. Easy to operate, install and maintain, lowest cost.
Related testing
1. Tensile strength = 1.1 x tensile strength reinforced (usually more than 600MPA).
2. Fatigue test: 2 million times fatigue strength test, connect in good condition.
Types:
Sys A: Parallel Thread Rebar Splice with Upset End
Sys B: Parallel Thread Rebar Splice with Rolled Thread End
Sys C: Cold Forged Sleeve Splice for Ribbed Rebar
Types and Applications of Parallel Thread Rebar Splice
| √ | Stand Splice |
| √ | Splice with Lengthened Thread End- Position Splices |
| √ | Splice with One Slope End |
| √ | Splice with Left & Right Hand Thread |
ISO Certification
About Diamond Group
Contact us
Related Keywords
